Dorner 73U005HS423FN, Installation, Maintenance & Parts Manual

Page: 12 / 20

Dorner Mfg. Corp. 12 851-679 Rev. C
7350 Series Side Mount 90° Drive Package
Preventive Maintenance and Adjustment
3. Remove two screws (Figure 21, item 1) and gear
reducer output shaft cover and bracket
(Figure 21, item 2) .
Figure 21
Figure 21
4. Use a hex key wrench (Figure 22, item 1) to remove set
screws on both bearings (Figure 22, item 2) . Slide gear
reducer and mounting bracket (Figure 22, item 3) from
spacer (Figure 22, item 4) on conveyor.
Figure 22
Figure 22
5. Remove gear reducer assembly from conveyor shaft
(Figure 23, item 1) , making sure to not lose key on
conveyor shaft.
Figure 23
Figure 23
6. Remove screws and mounting bracket
(Figure 23, item 2) from gear reducer
(Figure 23, item 3) .
7. To install components, complete steps 3 through 9 of
“US Version Side Drive Package” on page 7“.
US Version Motor Replacement
1
2
4
1
3
2
A
WARNING
SEVERE HAZARD!
LOCK OUT POWER before removing guards
or performing maintenance. Exposed moving
parts can cause serious injury.
A
WARNING
BURN HAZARD!
DO NOT TOUCH the motor while operating, or
shortly after being turned off. Motors may be
HOT and can cause serious burn injuries.
2
1
3