1 About this manual
1.1 Information about the
manual
This instruction is part of the product. The instruction
comprises important instructions for safe operation.
Therefore, the instruction must be carefully read
before using the product. This instruction must be
kept during the service life of the product and must
be passed on with the product. This instruction
describes the installation, startup, maintenance and
disassembly of the slide rail system G‑EMF XEA. The
text of the instruction is supported by figures in a
separate figure part. The chapter numbers in the text
can be found again top left in the figures in the figure
part. There is not always a figure in the figure part to
support a chapter in the text.
1.2 Target groups
The installation, startup, maintenance and
disassembly must only be carried out by skilled staff
which has been authorized by dormakaba. The
operation of the slide rail system may be carried out
by any person who is mentally and physically able.
1.3 Provided documents
• Installation manual
• Data sheet about the use of arrest systems
1.4 Symbols and abbreviations
used
1.4.1 Safety instructions
ATTENTION
This signal word indicates a situation of
potential risk, which could lead to damage
to property or the environment if not
averted.
1.4.2 Further labeling
2.
1.
Step‑by‑step graphics
1
2
Position numbers of parts
The illustration shows the mounting
DIN‑L on the hinge side. Mounting
DIN‑R takes place mirror‑inverted.
Illustration shows mounting DIN‑R on
the hinge side. Mounting DIN‑L takes
place mirror‑inverted.
1.4.3 Tool symbols
Allen wrench,
e.g. wrench size 3
1.5 Glossary
EMF
Electromechanical locking device
RMZ
Smoke detection panel
TS
Door closer
2 Safety
2.1 Intended use
The catching device is used to keep open door leaves.
The locking mechanism is used in conjunction with
external RMZ to keep open fire and smoke protection
closures. Fire and smoke protection closures must
meet the building regulation requirements ‘’self‑
locking’’. The electromechanical locking device is no
substitution for a door stop. The locking device is
released manually or via an external RMZ.
2.2 Limitation of liability
The manufacturer does not assume liability for
damages in the following events:
• Nonobservance of this instruction.
• A deviating application of the intended use.
• The assignment of insufficiently skilled staff.
• Unauthorized modifications.
• Technical alterations.
• The use of spare parts which are not authorized.
2.3 Prerequisites for the
operation of catching devices
The use of catching devices is subject to special
regulations by reason of official admission standards.
These regulations refer in particular to the inspection,
the continuing surveillance and the maintenance.
Follow the details from the data sheet about the use
of catching devices. Additional requirements apply for
the use as fire and smoke protection closures in
conjunction with the external RMZ and RM. A
separate verification of suitability is required for the
respective fire / smoke protection door.
2
G-EMF XEA
2017-10
dormakaba
WN 059411 45532
About this manual
Installation manual
