dormakaba Deutschland GmbH
DORMA Platz 1
58256 Ennepetal Germany T: +49 2333 793-0 F: +49 2333 793-4950
www.dormakaba.com
5 Start up
5.1 Set the fixture point
ATTENTION
Risk of cable damage
While setting the fixture points cables might
be damaged.
• Pay attention not to jam the connecting
cables.
1.
Feed the power supply (24 V/48 V DC).
2.
Open the fixed leaf until it clicks.
3.
Unbolt the screws of the locking unit(s).
4.
Open the door leaves to the desired hold open
bracket.
If the EMF is pushed to the end of the slide rail,
the cable clips must be removed.
5.
Unbolt the screws of the locking unit(s).
6.
Place the door stop into the position of the fixture
points selected.
5.2 Set the release force
ATTENTION
Risk of damage to the catching device
Setting a release force too high may result
in damage to the door hinges and the
fastening elements of the door closing
system.
• Set the release force depending on the
door width and the selected size of the
closing contact.
• According to the DIN EN 1155 the release
force must not be less than 40 Nm at a
door opening angle of 90° and not more
than 120 Nm.
1.
Set the release force.
2.
Control the release force.
5.3 Mount the paneling
1.
Attach the end caps.
2.
Mount the paneling of the glide rail.
5.4 Check locking
1.
Open the door leaf and lock it.
2.
Cut off power supply.
‣ The door leaf is released and closes.
6 Operating
6.1 Open and lock door
1.
Open door leaves to the fixture point.
‣ The door leaves remain standing after letting
go.
6.2 Close door
1.
Press shut the door leaf or press the optional
manual release button.
‣ The door leaf is released and closes.
7 Dismounting,
recycling and
disposal
Dismantling is the same procedure in reverse and
must be carried out by qualified personnel.
The product must be disposed of environmentally
sound. Electro‑technical parts and batteries must not
be disposed of as household waste. Dispose of
electro‑technical parts and batteries in the arranged
acceptance and collection points.
Tr
anslation o
f
the original manual, subjec
t
to change
witho
ut no
tic
e
