background image

.

.

.

.
.

.

.

.

.

Program switch settings:

Old New

OFF

1

2

3

4

5

AUTOMATIC

EXIT ONLY

PARTIAL

OPENING

PERMANENTLY

OPEN

Program switch settings:

Old New

OFF

1

2

3

4

5

AUTOMATIC

EXIT ONLY

PARTIAL

OPENING

PERMANENTLY

OPEN

AUTOMATIC FOLDING DOOR LOG BOOK

If a person or object comes within range of the
detectors or presence sensor, the door opens to the 
preset partial opening width and closes at the end of 
the preset hold-open time.

The opening width of the door can be adjusted 
individually. To do this:

       Close the door using the OFF switch setting         
       
       Set the program switch to PERMANENTLY OPEN
       
       The door opens at low (check) speed
       
       As soon as the door reaches the desired
       partial opening width, set the program switch to   
       PARTIAL OPENING
       
       The door stops and the control unit stores the
       desired  position

       The door commences a closing cycle

The door opens in check speed to its full opening width 
and remains in the position until another function is 
selected.

In the event of power failure

       If the program switch is in the AUTOMATIC
       position, the door will fail open.

       If the program switch is in the OFF position, the  
       door  will remain closed To open the door, turn the    
       program switch to AUTOMATIC. After a short  
       delay the door will open at reduce speed and     
       remain open until power is restored or the
       program switch is turned to Off.

       Alternatively, if FIRST ENTRY - LAST EXIT is fitted,    
       operate button once or key once to open the door.  
       To close the door, operate either button or key  
       once.

This sequence can be carried out as required until 
power is restored.

7

2021-10

Summary of Contents for FFT FLEX Green

















Reviews: