64
ED250
08-2018
DL4614-070
dormakaba ED250 IG Installation Instructions
Chapter 20
20.1 Parameters
TIPS AND RECOMMENDATIONS
• Parameters descriptions incorporate
firmware versions v1.7 through v2.1.
• Version numbers are noted next to each
applicable parameter description.
20.1.1 Firmware version
Step 1
Press and hold right button greater
than 3 s to enter program mode.
Step 2
Press up or down button to scroll through
parameters until desired parameter is
displayed.
Step 3
Press right button to display current
parameter value.
Step 4
Press right button again to enable
editing of value, display will start
flashing.
Step 4
Press up or down button to select
desired parameter value.
Step 5
Press right button to save selected
value. Display stops flashing.
Step 6
Press left button to return to selected
parameter.
Step 7
Press up or down button to scroll
through parameters until next desired
parameter is displayed.
Step 8
Press left button for a minimum of 3 s
to exit program mode.
Fig. 20.1.1 dormakaba handheld
20.1.3 Configuration parameters
Configuration parameters (Para. 20.1.6) are set during
first commissioning.
• Parameter AS, installation type is set in initial spindle
rotation. Reference para.16.15.2.
• Refer to Para. 20.1.8 for configuration parameter
detail.
20.1.4 Driving parameters
Driving parameters can be set once first commissioning
has been completed.
• Reference Para. 20.1.7 for a list of driving parameters.
• Reference ED250 Service Manual Chapter 17 for
details on each driving parameter.
1
Program switch,
3 position
20.1.5 Changing parameter values
1. Set program switch in CLOSE position
(or no program switch).
2. Use 4 button keypad as outlined in Steps 1 through 8
to view or change parameter values.
Fig. 20.1.2 Program switch
Fig. 20.1.3 4 button keypad,
2 digit display
1
4 button keypad
2
2 digit display
20 Parameters
1
> 3s Reset
< 3s Quit
> 3s
PRG
< 3s
LEARN
Fact-Setup
> 3s
> 8s
1
2
20.1.2 Firmware version and updates.
• Operator firmware version is displayed during first
commissioning. Reference Chapter 21.
• dormakaba handheld can be used to check operator
firmware version and to perform firmware updates.
Reference Service Manual Chapter 20, dormakaba
handheld, or dormakaba handheld manual.