SSRLS-3 / SSRLU-3
Installation Instructions
LOCK BODY INSTALLATION
1) Align the mounting plate of the lock body with (4) drilled holes on the door. Install Fasteners as follows:
2)
Lock Body Front Holes:
(2) 2-¾
”
long carriage bolts & washer Assly., k-lock nuts & acorn caps.
3)
Lock Body Rear Holes:
(2) 2-½
”
long carriage bolts, stamped washers, Flat Washers, k-lock nuts
& acorn nuts.
Important Note: Do not compress the door.
4) Rotate lever to make sure bolts extend and retract smoothly. Make sure the main bolt is extended before next step.
Flat
Washers,
“K” Lock nut
and acorn
caps
A
B
B
C
C
INS SSRLS_SSRLU-3 v10.2.vsd Created: 5-14-2018 Revised: 5-14-2018
Page 4
44"
(suggested)
Select a height
which is
comfortable
for users
Select a height
which is
comfortable
for users
Lock Body
44"
(suggested)
Select a height
which is
comfortable
for users
Lock Body
CORRIDOR SIDE OF THE DOOR
OUT-SWING MODEL
A
44"
(suggested)
Select a height
which is
comfortable
for users
Lock Body
CORRIDOR SIDE OF THE DOOR
OUT-SWING MODEL
A
Lock
Body
ROOM SIDE OF THE DOOR
44"
(suggested)
44"
(suggested)
OUT-SWING MODEL
Reference Line
A
Carriage bolts &
washer Assly.
thru door,
“K”
Lock nut and
Acorn cap Nuts
Main Lock
Body
Bolt
Extended
Bolt extends
when lever is
rotated down
