Commissioning
Technical Manual
50
04048135 - 2020/10
dormakaba access manager 92 30
9230-K7, TP4-Client
6.3
Initialise the device for Mobile Access
See also:
- Mobile Access system overview
- Planning guideline, Mobile Access
Initialisation depends on the readers used.
Reader
Initialisation
Registration unit
The access manager is initialised via a registration unit.
Compact reader
Every compact reader must be initialised.
Prerequisites
General
•
The access control system is set up by dormakaba for Legic Connect
System software •
See the chapter System requirements
•
A connection has been set up to Legic connect
Reader
•
The reader supports Mobile Access.
•
The reader is configured in the system software for Mobile Access.
•
The configuration is transferred.
•
The reader is installed and ready for operation.
Smartphone
•
The VCP Installer is installed and registered with the telephone num-
ber with Legic Connect.
The registration code received via SMS is entered.
•
Access to the Internet is possible (WLAN or mobile data).
•
The password for the VCP file is known.
Procedure
•
On the smartphone:
–
Start the VCP Installer.
–
Ensure that the method of transmission of the smartphone and the device is identical
Select the transmission type NFC or Bluetooth.
–
Select the VCP file.
If the desired VCP file is not present, select ‘Update’. Then, the smartphone down-
loads the VCP file.
–
Select ‘Send’.
–
Input the password for the VCP file.
–
Transmission type:
NFC
Bluetooth
Hold the smartphone in
front of the reader.
Keep the smartphone
within Bluetooth range of
the device.
If a device other than the
one desired flashes: In the
system software, match
the ‘RSSI filters’ of the
devices.
•
Reader to which the smartphone is held:
