5.6.2.4 Overview of bootloader variants
The bootloader variants and the differences for E300 (V4) and V3 are shown in the following
table. Some actuators have INI reset contacts. Short-circuit these contacts for about
10 seconds using a pair of electrically conductive tweezers. For some actuators (see table),
you also need hold up a master medium or authorised user medium to perform an INI reset.
Actuators
Tweezers
DIP switch
c-lever
—
c-lever compact
5
—
digital cylinder
5
—
Mechatronic cyl-
inder
5
—
Remote reader
—
7
6
compact reader
—
7
6
Legend:
5
Hold the master medium or authorised user medium in front of it (difference: For V4, be-
fore the INI reset or for V3, during the INI reset.)
6
Set DIP switch 5+6 to ON.
7
Not for online actuators
Reset information for other actuators can be found in the corresponding manuals.
Always perform the INI reset as described in the device manual.
Programming
User Manual
39
- 06/2021
dormakaba Programmer 1460
