manualshive.com logo in svg

Dormakaba 1460, User Manual

The Ledon 1460 Assembly Instructions Manual is a must-have for anyone looking to effortlessly assemble their product. This comprehensive manual provides step-by-step instructions in a user-friendly format. Download your free copy from manualshive.com and enjoy a hassle-free assembly experience.

Share
Download
background image

4.5.2.3 Beep

The beep setting is independent of the system software.

1.

Open the 'Settings' menu.

2.

Open the 'Actuator' menu.

3.

Log the master medium in to the actuator.

4.

Connect the programmer to the actuator.

5.

Choose the 'Beep' sub-menu.

6.

Press the ENTER key.

7.

Select 'On' or 'Off'.

8. Press the ENTER key.

ð

The selection is saved.

4.5.2.4 Light signal

This functions can only be applied for actuators with LED and illumination unit.

1.

Open the 'Settings' menu.

2.

Open the 'Actuator' menu.

3.

Log the master medium in to the actuator.

4.

Connect the programmer to the actuator.

5.

Choose the 'Illumination unit' sub-menu.

6.

Press the ENTER key.

7.

Select 'On' or 'Off'.

8. Press the ENTER key.

ð

The selection is saved.

Operation

User Manual

21

- 06/2021

dormakaba Programmer 1460

Summary of Contents for 1460





















































Reviews:

No comments

Related manuals for 1460

M5Stack M5StickC User Manual preview
M5StickC
Brand: M5Stack Pages: 16
Xilinx ZC706 Manual preview
ZC706
Brand: Xilinx Pages: 23
Xilinx ML505 User Manual preview
ML505
Brand: Xilinx Pages: 60
Xilinx ML505 Quick Start Manual preview
ML505
Brand: Xilinx Pages: 41
Xilinx Zynq UltraScale+ ZCU104 User Manual preview
Zynq UltraScale+ ZCU104
Brand: Xilinx Pages: 92
Xilinx Zynq UltraScale+ ZCU104 Quick Start Manual preview
Zynq UltraScale+ ZCU104
Brand: Xilinx Pages: 4
Xilinx Spartan-3A DSP FPGA Series Getting Started preview
Spartan-3A DSP FPGA Series
Brand: Xilinx Pages: 10
Xilinx ML605 User Manual preview
ML605
Brand: Xilinx Pages: 92
Advantech AIMB-705 Startup Manual preview
AIMB-705
Brand: Advantech Pages: 3
ST STEVAL-WESU1 User Manual preview
STEVAL-WESU1
Brand: ST Pages: 22
Gigabyte GA-P55A-UD3P User Manual preview
GA-P55A-UD3P
Brand: Gigabyte Pages: 136
Biostar TF570 Setup Manual preview
TF570
Brand: Biostar Pages: 115
Supero H8DGG-QF User Manual preview
H8DGG-QF
Brand: Supero Pages: 77
Supermicro Supero C7Z97-M User Manual preview
Supero C7Z97-M
Brand: Supermicro Pages: 147
TYAN S7105 Manual preview
S7105
Brand: TYAN Pages: 164
TransCore AP4118 User Manual preview
AP4118
Brand: TransCore Pages: 40
Yamaha 90A Owner'S Manual preview
90A
Brand: Yamaha Pages: 82
ASROCK IMB-790 Technical Reference preview
IMB-790
Brand: ASROCK Pages: 5

Brands by name

Popular brands

Load more brands