Maintenance Section
-116-
3. Start and run the engine to stabilize the coolant level
in the filter neck. If low add coolant until it reaches
the top of the filter neck. Install the radiator cap.
Observe coolant level in the expansion bottle. If
necessary, add coolant to bring the coolant to the
appropriate line on the expansion bottle.
4. Stop the engine.
5. Inspect the cooling system for leaks, hose cracks or
loose connections.
WARNING
Pressure air can cause personal injury.
When using pressure air for cleaning, wear a
protective face shield, protective clothing and
protective shoes.
Maximum air pressure must be less than 205 kPa
(30 psi) for cleaning purposes.
6. Blow any dust and lint from the radiator fins.
Air Cleaner Indicator - Check
Checking Service Indicator
Typical Example LP Engine Truck
1. Observe the air cleaner service indicator.
2. Service the air cleaner when the RED band in the
service indicator, lock in the visible position. See
topic, “Air Intake System - Check, Clean” in “Every
250 Service Hours or Monthly”.
NOTE: Service the element more frequently, as
required, in severe dust or lint conditions. Also,
service it more frequently where the operator is
required to wear a respirator.
3. Close hood and seat assembly.
Inspect Acceleration Pedal Operation(G643E
Only)
1. Verify foot pedal travel is smooth without sticking.
WARNING
When the acceleration pedal harness is connected
or disconnected, should be worked key OFF
condition.
If not, occurred malfunction, can cause the personal
injury.
Inspect Engine for Exhaust Leaks
1. Start the engine and allow it to reach operating
temperatures.
2. Perform visual inspection of exhaust system.
3. Repair any/all leaks found.
https://www.forkliftpdfmanuals.com/
