Doorentryonline SK401-E, User Manual

Page: 8 / 12

To add Card Users. (Method 1)
This is an easy way to enter
cards with auto-generated ID
numbers
The ID number will start from 1 if
no user has been programmed
1 Read card #
Cards can be added continuously without exiting programming mode
To add Card Users. (Method 2)
This is the alternative way to
enter cards using User ID
Allocation. In this method a User
ID is allocated to a card. Only
one user ID can be allocated to a
single card
1 ID number # Card #
The ID number can be any number from 1-1000
To add a series of cards users –
Block Enrolment
The card number must be
consecutive
(This operation is only for relay
1)
2 ID number # 8 digits or 10 digits Card number # Card
quantity #
Card quantity is between 1-1000
To delete Card users by cards
Note: Users can be deleted
continuously without exiting
programming mode
3 Read Card #
The device can automatically identify the card of relay 1 or relay 2
To delete Card users by user ID
This option can be used when a
user has lost their card
3 Enter the User ID #
To delete card users by card
number
9 Input 8 digits or 10 digits Card number #
Cards can be deleted continuously without exiting from programming
mode
To set users for Relay 2. 4 2 0 #
To set Pin user for relay 2 is the same as relay 1, accept the ID number is 1001-1100 for relay 2
To set Card user for relay 2 is the same as relay 1, with the exception of adding Card users with
auto-generated ID numbers and Block enrolment as below
To add Card Users. (Method 1)
Auto-generated ID numbers
2 Read Card #
Card can be added continuously without exiting programming mode