Programming 2 -------------------- Program Cards and PINS
Programming will vary depending on the access configuration. Follow the instructions according to your access
configuration
GENERAL PROGRAMMING INFORMATION
•
User ID Number:
Assign a user ID number to the access code in order to keep track of the users of access
cards or PINS. The user ID number can be any number from 0-989 standard users & 990-999 for visitor users
IMPORTANT: User IDs do not have to be proceeded with any leading zeros. Recording of User ID
is critical
Modifications to user data require either the card or the User ID be available
•
Proximity Card:
125 KHz industry standard 26 bit EM Proximity Card
•
Keypad PIN:
The PIN can be any 4-6 digits between 0000-999999 (except 1234 which is reserved for
factory testing)
ACCESS CONFIGURATION: CARD OR PIN & CARD ONLY
Add User Cards
Programming Step
Keystroke Combination
1. Enter Program Mode
﹡
(Master Code) #
2. Add Card: Using Auto ID
(Allows K401-EW to assign Card to next
available User ID number)
3. Add Card: Select Specific ID
(Allows manager to define a specific User ID
to associate the card to)
1 (Read Card) #
Cards can be added continuously
1 (User ID) # (Read Card) #
The user ID is any number from 0-989
4. Exit program mode
*
Delete User Cards
Programming Step
Keystroke Combination
1. Enter Program Mode
﹡
(Master Code) #
2. Delete Card: By card
3. Delete Card: Select Specific ID
2 (Read Card) #
Cards can be deleted continuously
2 (User ID) #
The user ID is any number from 0-989
4. Exit program mode
*
Add or Delete a PIN
Programming Step
Keystroke Combination
1. Enter Program Mode
﹡
(Master Code) #
2. Add a PIN
Assigns PIN to user ID number
3. Delete a PIN
Deletes the User ID number and associated
PIN
1 (User ID) # (PIN) #
PINS can be added continuously
2 (User ID) #
PINS can be deleted continuously
4. Exit program mode
*
