Set Access Configuration
There are 3 types of access configurations for the K401-EW
• Card or PIN (Default):
The User must present a valid Card to the K401-EW or enter their PIN code
followed by the # key, in order to be granted access
• Card Only:
The User must present a valid Card to the K401-EW in order to be granted access
• Card + PIN:
The User must first present a valid Card to the K401-EW and then enter their PIN code
followed by the # key, in order to be granted access
Programming Step
Keystroke Combination
1. Enter Program Mode
﹡
(Master Code) #
2. Card or PIN
3. Card + PIN
4. Card only
3 0 #
(Default)
3 1 #
3 2 #
5. Exit program mode
*
Set Relay Configuration
The relay configuration sets the behaviour of the output relay on activation
Programming Step
Keystroke Combination
1. Enter Program Mode
﹡
(Master Code) #
2. Pulse Mode
3. Latch Mode
4 (1-99) #
The relay time is 1-99 seconds. (1 is 50ms)
Default is 5 seconds
4 0 #
Sets the relay to ON/OFF Latch mod
e
4. Exit program mode
*
Set Strike-out Alarm
The strike-our alarm will engage after 10 failed card/PIN attempts. Factory default is OFF. The strike-our alarm
can be set to deny access for 10 minutes after engaging or it can be set disengage only after entering a valid
card/PIN or Master Code
Programming Step
Keystroke Combination
1. Enter Program Mode
﹡
(Master Code) #
2. Strike-Out OFF
3. Strike-Out ON
4. Strike-Out ON
5. Set alarm time
6 0 #
(Default)
6 1 #
Access will be denied for 10 minutes
6 2 #
The buzzer alarms
5 (0 - 3) #
(Default is 1 minute)
6. Exit program mode
*
