Visitor User Settings
There are 10 visitor ID’s available for PIN or Card/Fob use to a maximum of 10 tens after this, the PIN, Card or
Fob will become invalid automatically
** Ensure Visitor User ID’s are deleted after use
** PIN’s must not be the same as any other PIN programmed
Programming Step
Keystroke Combination
1. Enter Program Mode
﹡
(Master Code) #
2. Add visitor PIN
or
3. Add visitor Card User
4. Delete visitor users
8 (0-9) # (User ID) # (PIN) #
8 (0-9) # (User ID) # (Read Card #)
2 (User ID) #
5. Exit program mode
*
(0-9) Is the number of times the visitor PIN or Card can be used (Maximum 10 times)
The visitor User ID is any number from 990-999
Change a PIN
This operation is executed from outside of Program Mode
Programming Step
Keystroke Combination
1. Change a PIN
﹡
(User ID#) (Old PIN #) (New PIN #) (New PIN #)
2. Exit program mode
*
ACCESS CONFIGURATION: CARD+PIN
Add a Card+ PIN User
Programming Step
Keystroke Combination
1. Enter Program Mode
﹡
(Master Code) #
2. Add a User Card by ID number
1 (User ID) # (Read Card) #
3. Exit Program Mode
*
4. Add PIN
* (Read Card) (1234#) (New PIN #) (New PIN #)
This operation is executed from outside of
Program Mode
5. Exit program mode
*
Change PIN
Allows card user to update the PIN for their card + PIN User ID.
This operation is executed from outside of
Program Mode
Programming Step
Keystroke Combination
1. Change PIN using a Card
2. Change PIN using the User ID
* (Read Card) (Old PIN #) (New PIN #) (New PIN #)
* (User ID) # (Old PIN #) (New PIN #) (New PIN #)
3. Exit program mode
*
