6
It is possible to connect the Video Door Station conveniently and safely via the colour-coded cable
harness on the reverse of the Video Door Station. Please use appropriate crimp connectors or
terminal strips to connect the supplied cables with your wires. The accompanying crimp connectors
are weatherproof and are equipped with heat-shrink tubing which can be sealed after assembly by,
for example, carefully using a heat gun.
Description
Wire
White and orange network cable wire (Number 1, Transmit Data +)
White-orange,
orange,
white-green, green
Orange network cable wire (Number 2, Transmit Data -)
White and green network cable wire (Number 3, Receive Data +)
Green network cable wire (Number 6, Receive Data -)
Electric door opener (zero potential)
Purple, purple
Electric door opener (zero potential)
Electric door chime (zero potential)
Blue, blue
Electric door chime (zero potential)
Door-opening button (zero potential)
Yellow, yellow
Door-opening button (zero potential)
Power supply, negative pole (-)
Black, red
Power supply, positive pole (+)
Please take care when connecting the wires. Connecting the wires the wrong way may destroy the
Video Door Station.
Step 9: Antennas
Screw the external 2.4GHz WiFi antenna using an Antenna extension cable to the designated position
on the back of the Video Door Station. Screw also the external 433MHz RFID antenna using an
Antenna extension cable to the designated position on the back of the Video Door Station. We
recommend to feed the antennas out of the housing for better reception and transmission power,
because it is made of metal (shields). If you don’t want to use WiFi or RFID at all, you don’t have to
screw the respective antenna to the designated position.
Step 10: Final assembly
Applies only to DoorBird Video Door Station D201 and D202: Screw the front panel with the attached
Video Door Station to the mounting housing with the safety screws and the appropriate tool. Applies
only to DoorBird Video Door Station D203 and D204: Mount the Video Door Station with appropriate
screws/dowels on the wall/fence. If necessary, call a professional for help.
Step 11: Activating the Video Door Station
Switch on the power to the wires leading to the assembly location again. You can see whether you
have connected the power supply properly from the Diagnostic LED (it lights up once the power has
been connected correctly for up to five minutes and continuously in night-vision mode). The Video
Door Station is ready for operation (booting up process, any software updates, etc.) once it has
emitted a short diagnosis sound from the integrated loudspeaker. This may last for up to 5 minutes.
Should you not hear a beep, please check the power supply. Please also check whether you have
used a wall-plug power-supply and not PoE and whether you have connected the positive pole and
negative pole to the Video Door Station correctly.
