5
Conventional electric door chime
If someone rings your Video Door Station, you will immediately receive a
push notification with sound/vibration on your smartphone or tablet. In
addition the Video Door Station comes with a zero-potential relay
contact for connecting a conventional electric door chime inside the
building. The relay contact can be used to activate the separate
operating voltage of the door chime or the door chime via its trigger
input. If the operating voltage of the door chime is activated, it should
not be greater than 24V (AC/DC). The power consumption should not
exceed 1A. The Video Door Station does not provide its own power
supply for the door chime. This is provided through the separate power
supply of your conventional door chime. Should you have any questions,
please contact the manufacturer of your door chime. You can find
compatible door chimes and a sample wiring diagram at
www.doorbird.com/support
Two insulated wires.
Conventional door opener button
If an electric door opener is connected to the Video Door Station, the
door opener can be opened by App and also be directly controlled via a
zero-potential button to be found in the interior of the building, i.e. a
door opening button. In addition, the door opener button is to be
connected to the connection terminal provided. You can find compatible
door
opener
buttons
and
a
sample
wiring
diagram
on
www.doorbird.com/support
Two insulated wires.
Step 6: (Optional) Attaching the mounting stand
Position the mounting stand against the exterior wall of the house and use the screws provided to
position it in the dowels or on the wall.
Feed the wires that you want to connect to the Video Door Station through the hole provided in the
mounting housing.
Attach the mounting housing. The attachment of the mounting housing for the Video Door Station
series D20x is individually adapted to the assembly location. If necessary, call a professional for help.
Most common ways to attach the mounting housing:
Model
Attachment method
D201
With screws
D202
With screws and / or grout
D203
With screws and / or grout. You have to drill holes in the mounting housing if
necessary
D204
With screws and / or grout. You have to drill holes in the mounting housing if
necessary
Step 7: Preparing the wires
Remove about 5 mm of insulation material at the end of the wires that you would like to connect to
the Video Door Station.
Step 8: Connecting the wires
