10
Add make-up coolant through the external container
，
not
directly to the radiator
．
If radiator cap must be removed
，
do not remove when
engine is hot
．
Shut engine off and wait until cap is cool
enough to touch with bare hands
．
Slowly loosen cap to
first stop to relieve pressure before removing completely
．
★
★
★
★
S
ervice Tractor Safely
Do not service the tractor while it is in motion or while the
engine is running
．
When servicing front-wheel-drive-equipped tractor with
rear wheels supported off ground and rotating wheels by
engine power
，
always support front wheels in a similar
manner
．
Engaging front-wheel drive will pull rear wheels
off support if front wheels are not raised
．
Tighten wheel hardware to correct torque as specified in
Wheels
，
Tires and Tread section
．
Torque at intervals
shown in Break-In Period and Lubrication and
Maintenance sections
，
to ensure that wheel hardware
does not loosen
．
Reinstall protective covers removed during service
．
★
★
★
★
Support Machine Properly
Always lower the attachment or implement to the ground
before you work on the machine
．
If you must work on a
lifted machine or attachment
，
securely support the
machine or attachment
．
If left in a raised position
，
hydraulically supported devices can settle or leak down
．
Do not support the machine on cinder blocks
，
hollow tiles
，
or props that may crumble under continuous load
．
Do not
work under a machine that is supported solely by a jack
．
Follow recommended procedures in this manual
．
When implements or attachments are used with a tractor
，
always follow safety precautions listed in the implement
operator
'
s manual
．
★
★
★
★
Remove Paint Before Welding or Heating
Avoid potentially toxic fumes and dust
．
Hazardous fumes can be generated when paint is heated
by welding
，
soldering
，
or using a torch
．
Do all work outside or in a well ventilated area
．
Dispose of
paint and solvent properly
．
Remove paint before welding or heating
：
·
lf you sand or grind paint
，
avoid breathing the dust
．
