Installation, Operation and Maintenance manual
13
WSO Flex
Option 2
1. Remove the lifting eyebolts.
2. Apply MS polymer sealant around the existing mounting holes on the top of the
unit.
3. Place an M10 / M12 washer on each eyebolt and thread into the unit until tight.
4. Use a cable or chain to suspend the unit from each eyebolt.
Position the cables or chains so that they form a 60° angle with the top of the mist
collector and a 45° angle with the side surfaces.
Always use cable or chain that is rated for the appropriate weight of the mist
collector and any auxiliary equipment that is attached to the unit.
5. Level the unit in all directions.
1
Chain or cable
2
M10 / M12 eye bolt
3
M10 / M12 washer
4
MS polymer sealant
5
Existing mounting hole
A
Top view
B
Front view
1
45°
A
60°
B
2
3
4
5
Figure 6: WSO Flex ceiling mounting - option 2
