Donaldson Torit WSO 20, Installation And Operation Manual

Page: 20 / 32

17
Donaldson Company, Inc.
Final Filter Installation (WSO 20 and 25-1)
Note: The final filter must be replaced. Do not wash.
1. Unlatch the final filter on top of the unit.
2. Remove the filter and dispose of properly for the
materials collected.
Dirty filters may be heavier than
they appear. Provide a support
platform or have two people, one on each side
of the filter and pull the filter out.
3. Install the replacement filter gasket-side down.
4. Latch the new filter in place.
NOTICE
Final Filter Installation (WSO 25-2 and 25-3)
Note: The final filter must be replaced. Do not wash.
1. Open the final filter access door and lower the
retention handles to release the filter.
2. Remove the filter and dispose of properly for the
materials collected.
Dirty filters may be heavier than
they appear. Provide a support
platform or have two people, one on each side
of the filter and pull the filter out.
3. Install the replacement filter gasket-side up.
4. Seal the filter in place by lifting the retention handles
to the upright position.
NOTICE
final filter
(gasket-side
down)
latch
Final Filter Installation, WSO 25-1 shown
final filter
(gasket-side up)
retention
handle
Final Filter Installation, Powered WSO 25-2 shown