27
Donaldson Company, Inc.
Dumpster Pack
The dumpster, cover, and all associated hardware are
provided as a package. This includes a flex hose to
connect the dumpster lid to the hopper, and guides to
locate the dumpster in the correct position under the
hopper.
Installation
1. Fully install dust collector as outlined in the IOM and
installation drawings.
2. Install dumpster guides as illustrated in the dump
hopper and leg pack drawing and arrangement
drawings shipped with the Dumpster Pack.
3. Place lid on dumpster then place dumpster under
hopper. Install flex hose to hopper bottom.
4. Place pivot rod through lid and leg pivot point. Be
sure to place shaft collars as illustrated.
5. Mount pneumatic cylinders. Run tubing to control
valve after installing control valve in convenient
location.
6. Connect a compressed air source to the pneumatic
control valve.
7. Connect flex hose from the hopper to the dumpster
lid and tighten using hose clamp.
Operation
Improper operation or installation
of dumpster pack can lead to
personal injury and/or property damage.
1. Lift lid by moving valve lever until lid is totally
separated from dumpster.
2. Lift dumpster with fork lift. Use caution when
clearing lid.
3. Empty dumpster.
4. Return dumpster and position correctly.
5. Use caution closing lid. Watch for pinch points.
6. Secure lid with locked clamps (if equipped).
pivot bracket
pivot
shaft
dumpster
lid
bracket
shaft collars
Pivot Bracket
dumpster lid
dumpster
flex hose
dumpster guide (2)
Dumpster Pack
control valve
pivot
bracket
pivot shaft
tubing
pneumatic
cylinders
shaft
collar
*
customer supplied compressed air supply to control valve
*
Dumpster Mechanism
Summary of Contents for PowerCore VH 1-4
Page 43: ......
