8.
HOW TO RUN A DRYING CYCLE
•
OPL mode:
When the machine is in WAIT mode, proceed as follows:
1. If the OFF screen is displayed, touch the screen
anywhere and the main menu will be displayed.
2. In the main menu, use the arrows to select the
required programme and press START to activate
the drying cycle.
Note: The drying cycle parameters (temperature,
time, etc.) can be edited quickly prior to the start
by pressing on the central icon, editing the
required values and then pressing START. The
modified values will not be saved for future
operations.
•
SELF-SERVICE Mode:
When the machine is in WAIT mode, proceed as follows:
1. Select the required programme by pressing above
the programme button. If there are more than four
programmes, use the side arrows to display more
programmes.
2. Enter the minimum established payment (this
allows the drying cycle to be run with the minimum
programme time). The payment made and amount
pending are displayed.
The cost of extra time and the extra time
purchased are also displayed on the screen. If
the credit balance is increased, the drying time
remaining will also increase according to this
ratio.
3. After entering the required drying time, press
START to activate the drying cycle.
Note: while the cycle is running, more time can
be added according to the extra time - price ratio.
38
