68
4.5.2 Information displayed
The display offers different types of information, including the programme number, the time
remaining, the percentage humidity and the temperature setting. The information may vary
according to the state of the machine at any moment.
When the machine is operating, the % symbol flashes.
When the heating is ON, an arrow pointing upwards appears next to the thermometer.
The following table shows all the possible information displays and the conditions in which
they are displayed.
Display
Machine status
Comments
MP
In the ignition (2s)
Shows software version
END
End / Anti-crease
End of cycle / anti-crease cycle
(2)
AL-X
Alarm
Displays one of the alarms, see section 5
(2) The End / Anti-crease cycle lasts a maximum of 99 minutes. During this period, an alarm will
sound every three minutes, reminding you that the cycle has finished. After 99 minutes the
machine returns to the status: Pause..
4.5.3 How to run a drying cycle using a standard program
When the machine is in PAUSE mode, press the arrows to select the required programme
number.
When the required programme is displayed, press START/STOP and the required programme will
start.
4.5.4 How to run a drying cycle using the values defined by the user
When the machine is in PAUSE mode, press SELECT until 60º (Drying temperature) is
displayed flashing, and use the arrows to change the setting.
Press SELECT again until the drying time, 25’ is displayed flashing and use the arrows to change
the time.
Press START/STOP to start the drying cycle.
These values can be also modified while the machine is running.
