Domino C1000 plus, Operation And Maintenance Manual

Page: 9 / 170

SAFETY INFORMATION
77144 Issue 8 August 2009 9
SAFETY INFORMATION
SAFETY RECOMMENDATIONS
Before proceeding with installation, using or maintaining the printer, please read
this section of the manual carefully.
Domino UK Ltd. shall not be liable against any damage or problems that arise from
the use of any options or consumable products other than those designated as
original Domino UK Ltd. or Domino UK Ltd. approved products.
Fire safety
The C-Series range of inks are not classed as flammable. In the event of an
electrical fire, combustion of the ink may produce toxic and irritating vapours.
Locating the printer in a well ventilated location is highly recommended. The inks
are also sensitive to ignition by electrostatic discharge, precautions must be taken to
prevent this form of ignition occurring.
Please refer to the Domino Safety Data Sheet (SDS) for further details.
Maintenance
WARNINGS: (1)When performing any maintenance tasks that
involve the disassembly of any part, ensure the
mains power is removed.
(2)Ink contact with the eyes must be avoided,
therefore eye protection must be worn whenever
there is risk of ink splashing or misting.
CAUTION: The printer must always be kept upright, with the keyboard facing
upwards. During transit and in general handling, the printer should
not be tilted by more than 15 degrees. When installed, the underside
of the printer should be as close to horizontal as possible, so that the
printing nozzles are in a vertical line (not applicable to remote
heads). The printer should never be subjected to knocks or vibration.
If damage occurs to the mains plug or cable, replace immediately by contacting
your local Domino office.