manualshive.com logo in svg

Domino C1000 plus, Operation And Maintenance Manual, Page: 118 / 170

Share
Download
Domino C1000 plus Operation And Maintenance Manual Download Page 118

FORMATTING MESSAGES

118

77144  Issue 8 August 2009

Logos (Graphics)

It is possible to store logos in the control unit memory.
The logos can be inserted into any message and take up the full eight line height of
the message editor. There is no need to insert any height format boundaries.
Enter a logo from the default logo list as follows:

(1) Select the logo list 

 icon from the 

edit

which message?

  

Menu.

(2) Choose a logo, in this example the keep dry

logo is chosen, press 

enter

 to place the logo

into the message editor. 

(3) The logo name is automatically entered into

the message editor. When the logo has been
entered, other message attributes and text
can be entered into the message editor. Press

enter

 to name and save the message. The

following sample shows a simple message
format with a logo inserted.

 logo icon 

BLANK MESSAGE

1.
2.
3.
4.

123

Æ

Ç

Ä â

LOGOS

>KEEPDRY
 FRAGILE
 WAYUP
 RECYCLE

Select logo from list.

The logo will be represented 

on screen by the   icon.

BLANK MESSAGE

1.

2.

3.

4.

123

Æ

Ç

Ä â

Summary of Contents for C1000 plus











































































































































































Reviews:

No comments