manualshive.com logo in svg

Domino C1000 plus, Operation And Maintenance Manual, Page: 70 / 170

Share
Download
Domino C1000 plus Operation And Maintenance Manual Download Page 70

BASIC OPERATIONS

70

77144  Issue 8 August 2009

(3) When 

enter

 is pressed, the screen will return

to the main menu and the appropriate
message name will appear on the screen
prompt to confirm that it has been uploaded.
The message is now ready to be printed.

Load msg to memory:

 This also displays the saved messages in

alphanumeric order but, on selection it loads the message into memory to
allow for fast message changeover.  It does not affect the currently printing
message.  These messages in memory are selected from an external source.

Delete msg from memory:  

This displays the current list of messages

that are loaded into memory and enables the user to delete messages from
the memory list.  This does not delete the message from the printer.

PRINTING SCREW

NORMAL PRINT

INK STATUS OK

ABC

Summary of Contents for C1000 plus











































































































































































Reviews:

No comments