Smart Touch Cabin Control Installation & Operations Manual
OPERATION
L-3380 ENGLISH
17
Figure 26: Smart Touch Program #1
Scheduler Page 1 of 4
Each program has a mode, time, cooling set point, and heating set point (if dual set
points are enabled). The Mode choices are Off, Cool, Heat, Auto, Dehumidify. If Dual
Set Points is selected, the cooling set point is settable for Cool and Auto, and the
heating set point is settable for Heat and Auto. Set points are not settable for Off or
Dehumidify.
D
ATE
/T
IME
M
ENU
Date/Time Menu allows the user to set the display time, its format, and optional
display on Main Screen. To access the Date/Time Menu, go to Main Menu, and Date/
Time Menu, and select the setting to modify.
Figure 27: Smart Touch Date
and Time Settings
1.
Date/Time Display
Choose between On or Off to control the display of date/
time on Main Screen only.
2.
Date/Time Format
Choose between Automatic by Line Freq (60Hz line
frequency results in M/D/Y 12-hour format, and 50Hz line frequency results
in D/M/Y 24-hour format), M/D/Y 12-hour, or D/M/Y 24-hour.
3.
Date/Time Settings
This setting allows date and time modification. Each
date and time value are individually editable. The day of the week will
automatically be calculated based upon the date.
S
YSTEM
M
ENU
System menu allows the user to modify system settings related to the display. For instance, the screen background, font, icon
colors, screen saver configuration, and text editing are some of them. To modify any of the Display Settings, go to Menu and
then System Menu.
Figure 28: Smart Touch Date
and Time Settings
1.
Firmware Version
To access the control's software version (such as “A17”),
go to Menu, System Menu, and then Firmware Version.
2.
Display Setup
The available Display Settings to modify are below. Press the
Save icon after completing the desired modifications.
a.
Display Brightness
b.
Background Color
c.
Icon Text Color
d.
Icon Inside Color
e.
Icon Border Color
f.
Data Block & Title Colors