Dometic SINEPOWER MCP1204, Operating Manual

Page: 10 / 284

EN
General safety instructions PerfectCharge MCP1204/1207
10
•
Before starting the device, ensure that the power supply line and the
plug are dry.
•
Always disconnect the power supply when working on the device.
•
Please observe that parts of the device may still conduct voltage even
if the fuse has blown.
•
Do not disconnect any cables when the device is still in use.
A
NOTICE!
•
Ensure good ventilation.
2.5 Safety precautions when handling batteries
!
WARNING!
•
Batteries contain aggressive and caustic acids. Avoid battery fluid
coming into contact with your body. If your skin does come into
contact with battery fluid, wash the part of your body in question
thoroughly with water.
If you sustain any injuries from acids, contact a doctor immediately.
!
CAUTION!
•
When working on the batteries, do not wear any metal objects such as
watches or rings.
Lead acid batteries can cause short circuits which can cause serious
injuries.
•
Danger of explosions!
Never attempt to charge a frozen or defective battery.
Place the battery in a frost-free area and wait until the battery has accli-
matised to the ambient temperature. Then start the charging process.
•
Wear goggles and protective clothing when you work on batteries.
Do not touch your eyes when you are working on the battery.
•
Do not smoke and ensure that no sparks can arise in the vicinity of the
engine or battery.
A
NOTICE!
•
Only use rechargeable batteries.
•
Prevent any metal parts from falling on the battery. This can cause
sparks or short-circuit the battery and other electrical parts.
•
Make sure the polarity is correct when connecting the battery.
•
Follow the instructions of the battery manufacturer and those of the
manufacturer of the system or vehicle in which the battery is used.
MCP1204-1207--O-16s.book Seite 10 Freitag, 10. März 2017 12:04 12