Dometic RC1600, Operating Instructions Manual

Page: 6 / 16

30
To turn on
The car plug fitted to the connecting cable is to be plugged into the
socket/cigar lighter (car plugs are not supplied with every model).
When using battery operation, the cooling performance is not
thermostatically regulated, i.e. knob (A) is ineffective.
When knob (A) is ineffective or if the temperature is unnecessarily too low:
Turn off unit
Pull out plug from socket.
8. Liquid gas operation
Do not use any additional form of energy (mains/battery). The unit must not
be connected to town or natural gas pipelines. It is only suitable for use with
propane/butane gas (e.g. Calor Gas, Camping Gaz, Caravangas, etc).
The specified gas-connection pressure is given in mbar on the type plate
(see back of appliance). It is important that a non adjustable pressure-
regulator is used to reduce the pressure in the gas cylinder to the operating
pressure specified on the rating-plate, no other pressure may be used.
Needle valve operated gas control taps are NOT suitable for use with
this appliance and must not be used as a substitute for a pressure
regulator.
9. Connecting the cooling unit to the gas
cylinder
(The following instructions refer in the main to coolers manufactured for the
United Kingdom. For other countries please refer to your supplier).
Always connect in the following sequence:
GAS BOTTLE
→ →
PRESSURE-REGULATOR
→ →
APPLIANCE.
To connect the appliance to the pressure-regulator an APPROVED GAS
TUBING should be used. This should be minimum in length - have an inside
dimension of 8mm and be marked BS3212/2/8.
The pressure-regulator must be compatible for Butane 11 in (28 mbar) or for
Propane (37 mbar).
To connect the pressure-regulator to the gas bottle, the valve of the gas
bottle must be closed. After connecting the pressure regulator to the bottle
GB