Dometic PERFECTPOWER DCC2424-40, Installation And Operating Manual, Page: 19 / 372

EN
PerfectCharge Connect charging converter
19
Determine cable cross-section
I
The minimum cable cross-section depends on the maximum cable length:
9.1 Connect charging converter
A
➤
Connect the charging converter as shown:
–
Correct connection diagram: fig.
4
, page 5
– Connecting the batteries: fig.
5
, page 6
– Connect control line (I1): fig.
6
, page 6
9.2 Connect accessories
I
➤
Connect the accessory to the following contacts:
–
Performance regulation (I2): fig.
1
5, page 3
– Temperature sensor: fig.
1
6, page 3
NOTE
Keep the distance to the body battery as short as possible.
Cable length Minimum cable cross-section/Fuse
2.5 mm² /
30 A
4 mm² /
40 A
6 mm² /
60 A
10 mm² /
80 A
DCCxxxx-10
to the starter battery

7 m

11 m

16 m –
to battery structure

2 m

3.5 m

5 m –
DCC xxxx–20
to the starter battery –

5.5 m

8 m

14 m
to battery structure –

1.5 m

2.5 m

4 m
DCCxxxx-40
to the starter battery – – –

7 m
to battery structure – – –

2 m
NOTICE!
The charging converter must not be connected directly to the alternator.
NOTE - Performance regulation
To limit the output current of the charging converter to 5 A, a positive
control signal must be present at contact “I2” (fig.
1
5, page 3).
DCC1224-2424--IO-16s.book Seite 19 Donnerstag, 8. März 2018 3:06 15