EN
Mounting the stove
Dometic ORIGO
12
7
Mounting the stove
You can fit the stove into the countertop of your kitchen.
7.1
Selecting the installation location
When selecting the installation location, observe the following instructions:
Select a well-ventilated location for the device.
Avoid draft at the installation location.
If you fit the stove in an open cockpit or other open areas mount an
additional wind protection.
Do
not
operate the device in spaces where danger of explosion is pre-
sent.
7.2
Installing the stove
A
NOTICE! Danger of damaging the device!
Before drilling any holes, make sure that no electrical cables or oth-
er parts of the vehicle can be damaged by drilling, sawing and filing.
➤
Cut a rectangular hole into the countertop (dimensions see following
table):
➤
Open the top and remove the canisters.
➤
Place the stove in the middle of the cutout.
➤
Mark the drill holes.
Use the drill holes at the rim of the stove as template.
➤
Pre-drill the holes into the countertop where marked.
➤
Fasten the stove by screwing flat head screws through each drill hole at
the rim.
➤
Place a class B-1 fire extinguisher in reaching distance.
Model
Dimensions in mm
2000
345 x 320
2500
345 x 320
4100
575 x 320
4300
575 x 320
