EN
Using the stove
Dometic ORIGO
16
8.4
Using the heating element
(Dometic ORIGO 2500 and 4300 only)
A
NOTICE!
Never use alcohol and electrical burners simultaneously to prevent
overheating which can destroy the heating element.
➤
If applicable, remove the cutting board or lift the glass lid (both
accessory
).
I
NOTE
For your safety the stove will switch off the mains when you replace
the cutting board or close the glass lid (both
accessory
).
➤
To switch on the heating element push the button
“
”
and
within 10 s
the button “
+
”.
➤
Choose the desired power setting via the buttons “
+
” and “
–
”.
The power is regulated in five steps and indicated by the LEDs (see table
below).
Pushing the buttons will change the power setting by one step, holding
down the buttons will change the power setting by more than one step.
➤
To switch off the heating element push the button “0” symbol.
➤
Let the stove cool down to room temperature, before you place the cutting
board or close the glass lid (both
accessory
).
LED (fig.
3
1, page 2)
Power setting
No LED glows
heating element is off
LED 1 glows
20 %
LED 1 and LED 2 glow
40 %
LED 2 glows
60 %
LED 2 and LED 3 glow
80 %
LED 3 glows
100 %
