EN
Dometic FreshLight
Operating the roof air conditioner
27
9.8
Adjusting the air nozzles
The air supply within the vehicle can be regulated by setting the air nozzles.
The air nozzles can be regulated with a slide button (fig.
6
2, page 5) so that air is
directed to the front, the back or in both directions:
➤
Turn the knob on the slider anti-clockwise.
➤
Move the slider so that the air is directed in the required direction.
➤
Tighten the knob again in clockwise direction.
The slats (fig.
6
1, page 5) in the front air nozzle can be moved. This directs the air
in the required direction.
9.9
Setting the timer
The timer function allows you to set a specific time period for air conditioning. You
can specify the switch-on time, the switch-off time or both values. The time can be set
in 10 minute increments.
I
➤
Before programming the timer, select the air conditioning mode and all required
values (e.g. temperature).
Setting the switch-on time
➤
Press the
TIMER
button once.
✓
The
ON
symbol (
) flashes on the display of the remote control.
➤
Use the
+
or
–
button to set the time when the roof air conditioner is to switch on.
➤
Press the
SET
button to transmit the value to the roof air conditioner.
✓
The switch-on time is set on the roof air conditioner.
The roof air conditioner is switched on with the selected air conditioning mode
at the specified time.
➤
Switch the roof air conditioner to stand-by.
NOTE
The remote control returns to its initial mode if no button is pressed on
the remote control for 15 seconds while programming the timer.
08:00
FreshLight-O-16s.book Seite 27 Montag, 19. September 2016 6:29 18
Summary of Contents for FRESHLIGHT FL1600
