10. AIR BOX INSTALLATION
A.
Remove the two return air grills and
filters which are shipped loose in the air
box. (FIG. 10.A)
F.
The power supply to the air conditioner
may now be turned ON.
G.
Your air conditioner is now installed and
ready for operation.
Please read the
following instructions before attempting to
run the unit.
B.
Slide the front end of the air box over
the shafts of the thermostats and selector
switch. (FIG. 10.B)
FIG. 10.B.
C.
Install the four screws through legs in air
box into the prepunched holes in the
ceiling template.
NOTE:
There are three
optional
mounting holes for which no
screws are provided. (FIG. 10.C)
D.
Install the return air grills and filters by
simply pushing them into place.
(FIG.
10.D)
E.
Install the two knobs
of
the
thermostat
shafts.
FIG.
D., E.
TEMPLATE
provided on the ends
and selector
switch
10
11. OPERATING INSTRUCTIONS
(Refer to
FIG. 7)
A.
CONTROLS
1.
The Thermostat has a temperature
range of
in Cool (
) position
to
in Warm (
position. The
thermostat controls the unit compressor
ON and OFF cycle in the cooling
mode and the electric heater ON and
OFF cycle in the heating mode.
FIG.
2.
The Selector Switch controls the unit
fan speeds, and the heating, cooling
and fan modes of operation.
FIG. 11 .A.2
