Installing the device
MT 5000iQ
EN
10
9. Make sure that all fasteners are properly tightened and connections are secure, including the
connections at the fuse.
8.5
Configuring the device
After connecting the shunt and the battery monitor, the following values must be set:
• Battery capacity
• Battery type and absorption voltage
• Automatic output switch-on threshold
• Automatic output switch-off threshold
• Battery control booster/outside temperature sensor activation
• Display backlight
1. To configure the device, press and hold the
Menu
button (fig.
1
) for 3 seconds.
2. When the
Set
text is blinking on upper section of the display (fig.
6
), increase the
capacity value using the
Home
2
) or decrease it with the
Output
3
) button.
Description
1
Battery monitor display
2
Control cable
3
Temperature sensor
4
Shunt
5
Fuse
3 A
6
Starting battery
7
House battery
8
+12 V control signal
For relays or remote switching inverters
9
Accessories
Remote switched by + 12 V control signal
10
Chassis ground
11
Grounding strap
12
Common ground terminal
For minus cables from all 12 V consumers,
inverter and charging devices
13
Battery minus terminal
