Dometic BSC01, Installation And Operating Manual

Page: 10 / 208

Connecting the CAM1000 / BSC01 CAM 1000 / BSC 01
EN
10
Key for circuit diagram
I
The following connections must be implemented:
No. Designation Description
1 Green connection plug: Audio output to loudspeaker
2 Yellow connection plug: CVBS video output
3 Red/black wire: Buzzer for acoustic signal
4 Red wire: Connection to ignition (ACC) 12 V/24 V
5 Green wire: R = reverse gear 12 V/24 V
Optical display of objects
Warning sound active
6 White wire: Left turn signal < 10 seconds:
- Optical display of objects
- Warning sound inactive
A blue square appears on the screen.
Warning sound switches active
- After 3 minutes
- Speed >40km/h
6.1 Left turn signal> 10 seconds:
- Optical display of objects
- Warning sound inactive
A blue square appears on the screen.
Warning sound switches active
- With turn off of the left turn signal
7 Black wire: Connection to ground
8 Gray wire: Cable bridge for activation of operating mode A or B:
Loop open = operating mode B 165° FOV
Loop closed = operating mode A 140° FOV
9 Violet wire: GPS output 12 V/24 V for switching on the monitor (blue
line) (C3)
NOTE
• In Germany and Austria, special requirements apply for the operation to fulfill the
operating licence.
• CAM 1000 / BSC01 may only be operated with the M75LXAHD monitor.
• It is important for the compliant operation of the system that it cannot be switched
off manually. The CAM 1000 / BSC01 must therefore be connected via camera
input CAM3 of the M75LX AHD monitor. The corresponding blue control line
switches the system on and off.