Using the LCD monitor
PerfectView M70IP
EN
22
8.5
Setting the video source (fig.
0
, page 5)
➤
If you would like to switch to a different video source, press the “S” button (
2
).
✓
The monitor changes the camera in the order “Camera 1 – Camera 2 – Camera 3”.
➤
If you want to have the cameras run through
automatically
, press the “M” button (
3
) four
times to open the “Auto Scan” menu.
✓
The “Auto Scan” parameter is displayed at the top in the menu.
➤
Use the “–” (
5
) and “+” (
6
) buttons to select the desired operating mode:
✓
The monitor changes the cameras in the order “Camera 1 – Camera 2 – Camera 3”
automatically in the preset scan time.
➤
If you want to set the
display time
(1 s to 90 s), press the “M” button (
3
) four times to open
the “Auto Scan” menu.
➤
Press the “
V
” key (
4
) to select the “Scan time” parameter.
➤
Press the “–” button (
5
) to reduce the camera display time.
➤
Press the “+” button (
6
) to increase the camera display time.
➤
To
stop the automatic function
, open the Auto Scan menu (see above) and select the
operating mode “Off”.
8.6
Volume setting
To set the volume, proceed as follows:
➤
Press the “M” button (
3
) to open the “Screen” menu.
➤
Press the “
V
” key (
4
) to select the “Volume” parameter.
➤
Use the “–” (
5
) and “+” (
6
) buttons to select the desired volume.
M70IP-B-16s.book Seite 22 Dienstag, 12. Juli 2016 6:01 18
