PerfectView M70IP
Using the LCD monitor
EN
21
8.4
Adjusting the monitor (fig.
0
, page 5)
To set the monitor to suit your requirements, proceed as follows:
➤
Press the “M” button (
3
) to call up the required parameters.
✓
The parameters to be set appear in the following order:
Picture:
– Brightness: 0 – 100
– Contrast: 0 – 100
– Colour: 0 – 100
– Volume: (chapter “Volume setting” on page 22)
– Automatic brightness adjustment (“Auto Dim”): ON/OFF
– Set the distance markers (“Scale adjust”): (chapter “Setting the distance markers (fig.
0
,
page 5)” on page 23)
Options (“Option”):
– Language (“Lang”): English/Deutsch/Français/Español/Português/Italiano/
Nederlands/Русский (chapter “Setting the language (fig.
0
, page 5)” on page 20)
– Distance markers (“Scale”): ON/OFF
– Camera1/Camera2/Camera3 (“CAM1/CAM2/CAM3”): “Normal” or “Mirrored”
System:
– Video standard (“Color-Sys”): Auto/PAL/NTSC
– Screen background without the camera signal blue/black (“Blue Back”): ON/OFF
– Flip horizontal (“Horizontal”)
– Flip vertical (“Vertical”)
– Aspect ratio (“Zoom”): 16:9 or 4:3
Auto search (“Auto Scan”):
– Automatic scan (“Auto Scan”): ON/OFF
– Scan time: 1 – 90 s
– Camera1/Camera2/Camera3 (“CAM1/CAM2/CAM3”): ON/OFF
➤
Press the “–” button (
5
) to
reduce
the value of the selected parameter.
➤
Press the “+” button (
6
) to
increase
the value of the selected parameter.
➤
Press the “M” button (
2
) to switch to or exit the respective menu.
➤
Press the “S” button (
3
) to exit the menu.
M70IP-B-16s.book Seite 21 Dienstag, 12. Juli 2016 6:01 18
