EN
RM5310, RM5330, RM5380
Installing the refrigerator
23
6.5
Installing the flue duct
Proceed as follows (fig.
➤
Place the T-piece (
1
) on the adaptor (
2
) and the flue pipe (
3
).
➤
Attach the T-piece, adaptor and flue pipe with a screw (
4
).
➤
Make sure that the heat distributor (
5
) is fitted in its intended position.
➤
Insert the flue duct with the cover plate (
7
) through the intended opening in the
installation frame (
6
).
➤
Connect the flue duct and the cover plate with the T-piece (
1
).
➤
Shorten the flue duct (
7
) to the correct length if necessary.
➤
Place the LS100 ventilation grille (
9
) in the installation frame (
6
) and lock it into
place.
➤
Insert the cover cap (
8
) onto the flue pipe (
7
).
➤
Place the attachment for the flue duct (
10
) in the ventilation grille (
9
).
6.6
Securing the refrigerator
!
I
➤
Move the refrigerator into its final location.
➤
Fasten the four screws through the four plastic washers in the sides of the
refrigerator (fig.
, page 8), and further into the wall.
CAUTION!
Only drill through the receptacles provided, otherwise foamed compo-
nents, including cables, can be damaged.
NOTE
Attach the side walls or the attached strips so that the screws are tight,
even when under increased loads (while driving).
DometicRM53xx_INM_4445102229_EMEA(en-de-fr-nl)_20xx-xx-xx.book Seite 23 Dienstag, 30. März 2021 10:54 10