Dome DMMZ1 User Manual Download Page 5

Page 5

Mouser Advanced User Manual

Specifications

Package Contents:

Technical Specifications

Radio protocol

Z-Wave Plus (500 series)

Power supply

4x 1.5V AA Size

Max Current

100mA

Power Consumption

0.6W

Radio frequency

908.4 MHz US

Z-Wave Range

Up to 150’ depending on environment

Dimensions (L x W x H)

8.5” x 4.5” x 5”

Table 1 - 

Technical Specifications

User Manual

Mouser

Mouser

1 Year Limited Warranty

Elexa Consumer Products, Inc. (”ECP”) warrants to the orig-

inal retail purchaser (”Purchaser”) that the DOME Siren (the 

“Product”) will be free of defects in materials or workman-

ship under use for one (1) year from the date of purchase (the 

“Warranty period”).
For the Purchaser only, if the Product fails to perform as 

specifi ed during the Warranty Period due to defective parts or 

faulty workmanship, ECP will repair or replace the defective 

or damaged parts of the Product. Normal wear and tear is 

not covered nor is abnormal use, misuse, mishandling, faulty 

installation, improper shipping, damage caused by disasters 

such as fi re, fl ood or earthquake, neglect, accident or tam-

pering. This warranty covers only normal use in the United 

States or Canada.
To obtain warranty service during the Warranty Period, call 

Dome Customer Service (1-855-249-1754) or email: support@

domeHA.com for instructions on sending damaged parts and 

documentation for a Return Material Authorization (RMA). 

Products returned to ECP for repair or replacement without 

authorization will be returned at the sender’s expense. All 

warranty claims must be accompanied by a legible copy of 

the original receipt showing date and details of purchase. The 

RMA number must be clearly written on the side of the ship-

ping container in which you return the Product or defective 

parts. Unless otherwise instructed by ECP, the Product must 

be sent freight pre-paid to the following address:

Elexa Consumer Products, c/o Promac,
1153 Timber Dr., Elgin, IL 60123
ECP will repair or replace the defective parts and return them 

at ECP’s cost by a shipping method selected by ECP. When 

contacting ECP to obtain an RMA, Purchaser may request ex-

pedited return shipping at Purchaser’s expense.
THIS WARRANTY IS NOT TRANSFERABLE, AND, TO THE 

MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW IS 

IN LIEU OF ALL OTHER WARRANTIES, REPRESENTATIONS 

AND CONDITIONS, EXPRESSED OR IMPLIED, STATUTORY OR 

OTHERWISE, INCLUDING BUT NOT LIMITED TO THE IMPLIED 

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 

PARTICULAR PURPOSE. NO OTHER PERSON OR REPRE-

SENTATIVE IS AUTHORIZED TO MAKE ANY OTHER WARRAN-

TY ON BEHALF OF ECP OR ASSUME FOR ECP ANY OTHER 

LIABILITY IN CONNECTION WITH THE SALE OF THIS PROD-

UCT. IN NO EVENT WILL ECP BE LIABLE FOR ANY DAMAGES, 

INCLUDING BUT NOT LIMITED TO INCIDENTAL, SPECIAL OR 

CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR 

INABILITY TO USE THE PRODUCT, INCLUDING DAMAGES 

DUE TO ECP’S NEGLIGENCE.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND 

YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM 

STATE TO STATE AND COUNTRY TO COUNTRY.

CORRECT DISPOSAL OF BATTERIES IN THIS PRODUCT

This marking on the product, accessories or literature indicates that the product and its electronic accesso-

ries should not be disposed of with other household waste.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, please sep-

arate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of 

material resources.

Household users should contact either the retailer where they purchased this product, or their government 

offi  ce, for details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. 

This product and its electronic accessories should not be mixed with other wastes for disposal.

This marking on the battery, manual or packaging indicates that the batteries in this product should not be 

disposed of with other household waste. Where marked, the chemical symbols Hg, Cd or Pb indicate that the 

battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are 

not properly disposed of, these substances can cause harm to human health or the environment.

 

©2016 Elexa Consumer Products, Inc.

2275 Half Day Rd., Suite 333

Bannockburn, IL 60015

www.domeHA.com

#VIIDMMZ1

WARNING

This product was created to kill mice by electrocution. It emits a high voltage 

electric shock. DO NOT allow children to play with or be anywhere near this 

device. Any small animals entering this device when the power is on, may be 

killed. People with heart conditions should take special care when handling 

this device. Do not use near fl ammable liquids, vapors or other combusti-

bles because of potential danger of fi re or explosion. Turn off  power when 

handling. Keep hands and all objects out of the chamber unless the device is 

turned off  and batteries are removed.

Specifications

Summary of Contents for DMMZ1


















Reviews: