Page 12
Door/Window Sensor Advanced User Manual
Button Behavior
Action
Condition
Result
Open the Cover
Door/Window Sensor Not
Yet Included in System
LED Indicator blinks yellow (red + green) until the
Sensor Cover is replaced
Door/Window Sensor
Already Included in
System
Device sends a tamper notification to its controller,
awaits further instructions, and the LED Indicator
blinks red until the Sensor Cover is replaced
Open the Cover,
then Replace it
Door/Window Sensor
Already Included in System
Device sends a wake up notification to the main
controller and awaits further instructions.
Push Button 3
Times
Door/Window Sensor
Already Included in
System
Device sends node info to Group 1
Door/Window Sensor
Already Included, and
Controller is in Exclusion
Mode
Device is excluded from the system and re-
moves the Home ID from its memory
Door/Window Sensor Not
Yet Included in System,
and Controller is in
Inclusion Mode
Device enters inclusion mode and includes into
whichever network is also in inclusion mode
Move the Magnet
and Sensor In
and Out of the
Closed Position 6
Times with Cover
Removed
Door/Window Sensor
Already Included in
System
Device will be reset to factory settings, and a
DEVICE_RESET_LOCALLY command will be sent
to Group 1
Any condition (as long as
the device has power)
The device’s memory will erase to factory default
settings and any associations, configuration
parameters, and other locally saved data will be
lost
Table 3 - Button Behavior
Button Behavior
