18
|
Dolphin Blue
|
DB 1200T
Check the flow time.
Check the solenoid valve. If needed
replace the solenoid valve.
Check the battery. Low or used up
battery. Replace the battery.
Check the flow time
Check the connection between the
Piezo switch connector and the
solenoid connector.
Check that the battery is correctly
connected.
Check the solenoid valve. If needed
replace the solenoid valve.
Use scale remover if needed. When
replacing the spring, make sure that it
is in vertical position.
Check the water supply pressure. It
must be 1.0- 8.0 bar (7-116 PSI). With
water pressure of more than 8 Bars, use
a pressure reducing valve.
Check the filter\s. If needed, remove
it\them clean it\them and reinstall it.
SERVICE CHECK LIST
No water is coming out
of the shower control
Water flow diminished
Water flow does not stop
