Dolphin Dolphin Blue DB 1200T Installation And Maintenance Manual Download Page 19

DB 1200T

|  

Dolphin Blue

|  

19

LIMITED WARRANTY

Dolphin Dispensers warrants that its electronic shower controls, flush valves and

controls will be free of defects in material and workmanship during normal use for

two years from the date the product is purchased.

If a defect is found in normal use, Dolphin Dispensers will, at its discretion, repair,

provide a replacement part or product, or make appropriate adjustments. Damage

caused by accident, misuse, or abuse is not covered by this warranty. Improper care

and cleaning will void the warranty. Proof of purchase (original sales receipt) must be

provided to Dolphin Dispensers with all warranty claims.

Dolphin Dispensers is not responsible for labor charges, installation, or other incidental

or consequential costs other than those noted above. In no event shall the liability of

Dolphin Dispensers exceed the purchase price of the shower control, valve or control.

If you believe that you have a warranty claim, contact Dolphin Dispensers, Dealer or

Plumbing Contractor. Please be sure to provide all pertinent information regarding

your claim, including a complete description of the problem, the product, model

number, the date the product was purchased, from whom the product was purchased

and the installation date. Also include your original invoice.

DOLPHIN DISPENSERS AND/OR SELLER DISCLAIM ANY LIABILITY FOR SPECIAL,

INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty excludes product damage

due to installation error, incorrect maintenance, wear and tear, battery, water

composition, product abuse, or product misuse, whether performed by a contractor,

service company, or the consumer. This warranty does not cover product damage

caused by the following:

- Incorrect installation, inversions of supply pipes.

- Pressures or temperatures exceeding recommended limits.

- Improper manipulation, tampering, bad or lapsed maintenance.

- Foreign bodies, dirt or scale introduced by the water supply.

Summary of Contents for Dolphin Blue DB 1200T





















Reviews: