22
Repair Manual PS-35
Grip mechanism
Unscrew screw
1
and pull the lower grip half
slightly up and to the rear in the area of the
screw hole.
Note:
When disassembling the throttle lever,
the following must be performed:
• Remove cover.
• Unscrew all middle screws of the damping
springs (Chapter 09).
• Remove tubular handle.
The throttle lever has a slot
2
at the hinge.
Pull the tank and engine unit slightly apart
(being careful of the fuel lines), swing the
throttle lever up, and remove it.
In assembly,
fi
rst place the throttle lever spring
3
on the throttle lever, then push the lever onto
the hinge with the slot. The throttle lever must
be turned by 180° to do this.
The catch lever
4
can easily be pushed
through the chamfer on the seat.
The spring
3
is engaged in the throttle lever as
shown.
10 TANK
1
2
4
3
3
