Dolmar HEDGE HT-355 Instruction Manual Download Page 4

3. 

Hold  the  power  tool  by  insulated  gripping 
surfaces  only,  because  the  cutter  blade  may 
contact  hidden  wiring  or  its  own  cord.

 Cutter 

blades  contacting  a  "live"  wire  may  make 
exposed  metal  parts  of  the  power  tool  "live"  and 
could give the operator an electric shock. 

4. 

Keep  cable  away  from  cutting  area.

  During 

operation the cable may be hidden in shrubs and 
can be accidentally cut by the blade. 

5. 

DANGER  -  Keep  hands  away  from  blade.

 

Contact  with  blade  will  result  in serious  personal 
injury. 

6. 

Do not use the hedge trimmer in the rain or in wet 
or very damp conditions. The electric motor is not 
waterproof. 

7. 

First-time  users  should  have  an  experienced 
hedge  trimmer  user  show  them  how  to  use  the 
trimmer. 

8. 

The hedge trimmer must not be used by children 
or  young  persons  under  18  years  of  age.  Young 
persons  over  16  years  of  age  may  be  exempted 
from this restriction if they are undergoing training 
under the supervision of an expert. 

9. 

Use  the  hedge  trimmer  only  if  you  are  in  good 
physical condition. If you are tired, your attention 
will  be  reduced.  Be  especially  careful  at  the  end 
of  a  working  day.  Perform  all  work  calmly  and 
carefully. The user is responsible for all damages 
to third parties. 

10.  Check  to  make  sure  that  the  voltage  and 

frequency of the power supply correspond to the 
specifications given on the identification plate. We 
recommend  the  use  of  a  residual-current-
operated  circuit  breaker  (ground-fault  circuit 
interrupter)  with  a  tripping  current  of  30  mA  or 
less, or an earth leakage current protector. 

11.  Work gloves of stout leather are part of the basic 

equipment of the hedge trimmer and must always 
be  worn  when  working  with  it.  Also  wear  sturdy 
shoes with anti-skid soles. 

12.  Before starting work check to make sure that the 

trimmer is in good and safe working order. Ensure 
guards  are  fitted  properly.  Check  cable  for 
damage  before  starting  work  and  replace  if 
necessary. The hedge trimmer must not be used 
unless fully assembled. 

13.  Keep  cable  away  from  the  cutting  area.  Always 

work in such a way that the extension power cord 
is behind you. 

14.  Remove plug from the mains immediately if cable 

is damaged or cut. 

15.  Make  sure  you  have  a  secure  footing  before 

starting operation. 

16.  Hold the tool firmly when using the tool. 
17.  Do not operate the tool at no-load unnecessarily. 

18.  Immediately  switch  off  the  motor  and  unplug  the 

mains plug if the cutter should come into contact 
with  a  fence  or  other  hard  object.  Check  the 
cutter  for  damage,  and  if  damaged  repair 
immediately. 

19.  Before  checking  the  cutter,  taking  care  of  faults, 

or removing material caught in the cutter, always 
switch off the trimmer and unplug the mains plug. 

20.  Switch off the trimmer and disconnect and secure 

the  mains  plug  before  doing  any  maintenance 
work. 

21.  When  moving  the  hedge  trimmer  to  another 

location, including during work, always unplug the 
mains plug and put the blade cover on the cutter 
blades. Never carry or transport the trimmer with 
the  cutter  running.  Never  grasp  the  cutter  with 
your hands. 

22.  Clean the hedge trimmer and especially the cutter 

after  use,  and  before  putting  the  trimmer  into 
storage for extended periods. Lightly oil the cutter 
and put on the cover. The cover supplied with the 
unit can be hung on the wall, providing a safe and 
practical way to store the hedge trimmer. 

23.  Store  the  hedge  trimmer  with  the  cover  on,  in  a 

dry room. Keep it out of reach of children. Never 
store the trimmer outdoors. 

24. 

To  reduce  the  risk  of  disconnection  of  hedge 
trimmer  cord  from  the  extension  cord  during 
operating,  use  the  hook  complete  described 
in this manual. 

25. 

If the power cord is damaged, disconnect the 
mains plug. 

26. 

First  Aid

  -  For  the  event  of  a  possible  accident, 

please  make  sure  that  a  first  aid  kit  is  always 
immediately  available  close  by.  Immediately 
replace any items used from the first aid box. 

SAVE THESE INSTRUCTIONS. 

 

WARNING: 

DO  NOT  let  comfort  or  familiarity  with  product 
(gained from repeated use) replace strict adherence 
to  safety  rules  for  the  subject  product.  MISUSE  or 
failure  to  follow  the  safety  rules  stated  in  this 
instruction  manual  may  cause  serious  personal 
injury. 

 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for HEDGE HT-355





































Reviews: