Dolby Laboratories IMS3000 User Manual Download Page 10

Page: 10 / 134

1 Introduction to the Dolby IMS3000 User’s

Manual

This documentation provides the instructions for operating the Dolby IMS3000.

•

Supporting documentation

•

Contacting Dolby

1.1 Supporting documentation

Dolby provides a full set of documentation to support setting up and configuring the Dolby
IMS3000 with Dolby Atmos audio.

•

The

Dolby Atmos Designer User’s Manual provides instructions for configuring the theatre

auditorium audio parameters and for generating a Dolby Atmos Designer (

.dad

) file.

•

The

Dolby Multichannel Amplifier Manual provides instructions for setting up the Dolby

IMS3000 with a Dolby Multichannel Amplifier.

•

The

Dolby Atmos Interface DAC3202 Manual provides instructions for setting up a Dolby

DAC3202.

•

The

Dolby IMS3000 Installation Manual provides instructions for installing and setting up

the Dolby IMS3000.

•

The

Dolby IMS3000 software bundle release notes include information about software

component versions and release notes.

1.2 Contacting Dolby

You can contact Dolby Cinema Solutions and Support using email or regional telephone
numbers. You can also access documentation by visiting the Dolby customer portal.

Contact Dolby Cinema Solutions and Support

•

Send an email to

[email protected]

•

Call:

Americas: +1-415-645-4900
Europe/Middle East/Africa (EMEA): +44-33-0808-7700
Asia-Pacific (APAC): +86-400-692-6780
Japan: +81-3-4540-6782

Access documentation

Visit

www.dolbycustomer.com

Submit feedback about this documentation

Send an email to

[email protected]

Introduction to the Dolby IMS3000 User’s Manual

Dolby IMS3000 User

s Manual

10 December 2018 IMS.OM.005280.DRM Issue 4

Summary of Contents for IMS3000







































































































































Search results

Summary of Contents for IMS3000

Reviews:

Related manuals for IMS3000

Brands by name

Popular brands

Dolby Laboratories IMS3000, User Manual

Search results

Summary of Contents for IMS3000

Reviews:

Related manuals for IMS3000

Brands by name

Popular brands