Dolby Laboratories iMeet, Configuration Manual

Page: 17 / 31

c) In the
Dvms.Proxy.Address
field, type the proxy address.
d) Drag Proxy Port to the device configuration.
By default, this parameter is set to 8080. It specifies the network port for the proxy
server.
e) Set
Dvms.Proxy.Port
by typing in a value or using the slider to set a value.
f) Drag Proxy User to the device configuration.
g) In the Dvms.Proxy.User field, type the proxy authentication user name.
h) Drag Proxy Password to the device configuration.
i) In the Dvms.Proxy.Password field, type the proxy authentication password.
2.7 Voice VLAN settings
If the VLAN and LAN settings are not configured automatically, enter the LAN or VLAN
information in the network settings. The phone can be configured on single or dual-VLAN
networks.
Prerequisites
You will need information about the voice and data VLAN settings for your organization. See
this table for the information that is required.
Attributes Description
Voice and data VLAN. Determine whether there are separate voice and data VLANs.
Do the LAN switches have Link
Layer Discovery Protocol
(LLDP) enabled? If your network is configured this way, the phone is placed on the
voice VLAN automatically through LLDP discovery.
If you do not want to place your phone on the voice VLAN, you must
disable LLDP.
Does the Voice VLAN have
access to the Internet via
these proxies? If no, the phone cannot be placed in the voice VLAN and must be
placed in the data VLAN.
Note: You may have to disable LLDP to achieve this.
About this task
The Dolby Conference Phone supports LLDP VLAN autodiscovery. By default, the phone uses
LLDP to detect voice VLAN. If VLAN is available, the phone places itself on the voice VLAN.
Depending on your network settings and phone software version, this procedure may not be
necessary. Note that:
•
If your network does not implement voice VLAN and data VLAN segregation, then ignore this
topic and move on.
•
If your network implements voice VLAN, but does not restrict Internet access from the voice
VLAN, then ignore this topic and move on.
•
If you are using Conferencing Only Mode and your voice VLAN restricts Internet access, we
recommend using the data VLAN by disabling LLDP VLAN autodiscovery.
•
If you are using Dual Mode , you must use the voice VLAN and allow Internet access from the
voice VLAN.
For a complete description of this functionality, including additional VLAN options, see the
Dolby Conference Phone Administrator's Guide .
Configuration procedures
Dolby Conference Phone version 4.1 Configuration Guide for iMeet
5 October 2018
17