9.4 Current satellite list
The satellite positions stored in memory are shown in the
satellite list. Any positions not yet stored in memory are
marked with an “
*
”.
>
To adjust the antenna dish to a position on the satellite
list, use the
arrow keys
to select the field
Current
Satellite list
.
>
Confirm by pressing
OK
.
>
Use the
arrow keys up/down
to select the desired
position.
>
Confirm by pressing
OK
.
The antenna dish will now be rotated to the selected
position. The rotating procedure will be indicated by a
blinking display “
rotating
” in the menu.
9.4.1 Selecting a satellite position
To rotate the antenna to the position determined in the
satellite list, your digital receiver is equipped with the function
turn to Sat
.
>
Press the
yellow
function key
Actions
to open the
window displaying the available actions.
>
Use the
arrow keys up/down
to select the line
turn to Sat
.
>
Confirm by pressing
OK
.
>
Pressing the
green
key
turn to Sat
will rotate the
antenna to the selected satellite position.
9.5 Deleting a satellite position
To delete a satellite position from the satellite list, proceed as
follows:
>
Use the
arrow keys
to mark the field
Current
Satellite list
.
>
Press
OK
to open the current satellite list.
>
Use the
arrow keys up/down
to select the satellite
you wish to delete.
>
Confirm by pressing
OK
.
>
Use the
arrow keys
to mark the field
Sat delete
.
>
To delete the satellite selected, press
OK
and confirm
the message displayed by again pressing
OK
.
9.6 Reference position
When installing the external installation the motor must be set
to the reference position (
0°
). You can therefore rotate the
motor to this position (
0°
) at any time by means of the
function “
Go to reference position
”.
>
Press the
red
function key
Ref.pos
to rotate the
antenna automatically to the reference position.
58
bed_anl_DVB13 CIP_englisch_q5.qxd 08.09.03 11:15 Seite 58
All manuals and user guides at all-guides.com
