User Information
Load-bearing tower Staxo 100
Horizontal assembly
31
999804302 - 02/2018
Horizontal assembly
Preliminary remark:
▪
The terms 'vertical' and 'horizontal' (e.g. referring to
the diagonal crosses) are always used here with ref-
erence to their installation situation in the finished,
upright tower.
▪
The job of erecting the load-bearing tower begins
with the bottom (i.e. first) 'storey'.
▪
Arrow on frame must be pointing upwards.
(= yellow locking spring at bottom)
Erecting the first storey
➤
Having regard to the instructions given above, place
the tower frames on their sides on timber supports
(min. 4cm high).
Bracing the frames in the vertical
➤
Link the frames with diagonal crosses.
NOTICE
General remarks:
▪
Slide the diagonal cross onto the safety-
catch bolt and immediately secure it with the
safety catch.
98003-206-01
98003-216-02
NOTICE
When erecting the tower, make sure that the
climbing rungs are in the correct position rela-
tive to the tower.
Seen from outside, the ladder must always be
on the left-hand side.
This makes it possible to use scaffold planking
units where needed (see 'Assembling towers
in the upright with 'mounted-ahead' railings').
F
Diagonal cross
98003-286-01
98003-216-01
F
F
