Doka Staxo 100 User Information Download Page 24

Page: 24 / 96

999804302 - 02/2018

System description

User Information

Load-bearing tower Staxo 100

on single-storey towers

Note:

For towers consisting of one 'storey' only, the min. val-

ues L

and L

given in Tables B and C for the screwjack

head and base units respectively will often not be

reached.

Reason:

The lengths of the screwjack head and base

units and the integrated connector in the frame add up

to a larger dimension than the height of the frame.
These constraint points have already been allowed for

in the operational height data given in Table A.

Close-up: Cut-away view of frame tube

Connector

30.5

Screw jack foot

69.2

Heavy duty screw jack 70

101.2

Heavy duty screw jack 130

173.0

Screw jack U-head

68.8

4-way screw-jack head

68.8

Heavy duty screw jack 70 top

100.9

U-head D

10.0

Connector

98003-238-01

Summary of Contents for Staxo 100

































































































Search results

Summary of Contents for Staxo 100

Reviews:

Brands by name

Popular brands

Doka Staxo 100, User Information

Search results

Summary of Contents for Staxo 100

Reviews:

Brands by name

Popular brands