Dogtek Canicom 200, User Manual

Page: 5 / 12

CANICOM 200 – User’s guide – May 2009 5/12
Diagram 4
ƒ
Activate/deactivate the remote control
Remote control is supplied with battery inserted.
▪
Activate: press the On/Off red button ( ) located on the side of the remote control for 1
second (ref. Diagram.1). Indications appear on the LCD screen.
▪
Deactivate: press the On/Off red button ( ) of the remote control for 1 second (ref.
Diagram.1). The LCD screen is off.
To increase the battery life of the remote control, we recommend you to deactivate the unit if you are not
using it for a long period.
ƒ
Activate/deactivate the receiver collar
A magnet located in the remote control is used to either switch on/off the receiver collar.
▪
Activate: Place the red mark located on the remote control in contact with the red mark located on
the receiver collar for 1 second (ref. Diagram 5). The indicator light on the collar will flash in green
indicating that the CANICOM receiver is ready.
▪
Deactivate: Place the red mark located on the remote control in contact with the red mark red
mark on the receiver for 1 second (ref. Diagram 5). The indicator light on the collar will flash from
green to red and then off: the CANICOM receiver is off.
To increase the battery life of the receiver collar, we recommend you to deactivate the unit if you are not
using it for a long period.
ƒ
Coding of the remote control and receiver collar
Approach until coming in contact those 2
areas for 1 second
REMOTE
CONTROL
RECEIVER
COLLAR
Polarity « - » of the
battery
Polarity « + » of the
battery
Seal
Diagram
5